How to Slick Back Men's Hair: Technique and Product Guide

The slick-back is one of the most recognizable men's styles. When it works, it is clean and deliberate. When it does not work, it just looks greasy. The difference is almost entirely in the product and the application.

What the Slick-Back Requires

You need enough hair to slick back without the sides pushing forward and competing with the direction. The standard range is 3 to 5 inches on top. Less than 3 inches and the hair cannot maintain the direction. The sides need to be short enough to stay out of the way.

The hair needs to be clean. Slicking back dirty or oily hair amplifies the greasiness. Start with freshly washed hair every time you are going for a clean slick-back result.

Product Choice

High-hold pomade is the traditional choice for a slick-back. Oil-based pomades give the most shine and the most hold, but they require multiple washes to remove completely. Water-based pomades are easier to wash out and still provide strong hold with a similar shine.

For a matte slick-back with strong hold and no shine: a water-based clay or paste. The look is more understated. This version suits casual and professional settings equally.

Avoid light creams or sprays for a slick-back. They do not provide enough hold to keep the hair in the swept-back direction through the day.

Application Technique

Start with damp hair after a shower. Towel dry until damp but not dripping.

Take a small amount of pomade, about the size of a pea to a dime depending on your hair length and density. Rub it between your palms to warm it and distribute it evenly.

Work the product through the hair from front to back first, focusing on the roots. The roots determine the direction. If the root section is not pushed back, the hair will fall forward regardless of how much product you use on the lengths.

Use a comb to define the direction. Comb straight back from the hairline. For a side part version, create the part first with a comb, then push each section back in its respective direction.

A blow dryer directed backward while combing through sets the direction and adds hold. The heat sets the pomade while the hair dries. This step is what separates a style that holds for hours from one that falls forward by midday.

Maintenance Through the Day

A slick-back done correctly with the blowdryer step should hold through a full day without touch-ups. If the front section starts to fall forward, a small amount of additional pomade on the fingertips and a single stroke back is all the touch-up needed.

Carry a small pocket comb if you are maintaining a defined version. A single pass at midday keeps it looking fresh.

Washing Out

Oil-based pomade requires two wash cycles to fully remove. Shampoo the dry hair before getting in the shower. The dry application breaks down the oil better than water-diluted shampoo. Rinse, then shampoo again in the shower normally. Water-based pomades typically come out in one wash.

Frequently Asked Questions

How long does hair need to be to slick back?

3 inches minimum to have enough to push back and stay. Under that length, the hair does not have enough weight to maintain the backward direction against the natural growth pattern. Most slick-back styles work well with 3.5 to 5 inches on top.

Can fine hair achieve a slick-back?

Yes, but with higher-hold product than thick hair needs. Fine hair is lighter and falls forward more easily. A strong hold pomade or a blowdryer setting step is more important for fine hair than thick hair. The result looks clean when held well. Without enough hold, fine hair slick-backs tend to fall apart within an hour.

What is the difference between a slick-back and a pompadour?

A pompadour has visible height and volume at the front of the top. The hair is swept up and back, creating a lifted shape at the forehead. A slick-back lies flat and is swept straight back without the front lift. Both go backward but the pompadour has elevation and the slick-back does not.

Does the slick-back work without a fade?

Yes. A slick-back with a taper or longer sides creates a different, more classic look than the version with a skin fade. The 1920s and 1950s versions of the slick-back had minimal fade work and long sides slicked back alongside the top. Either version is valid depending on the overall look you want.

What causes the slick-back to look greasy instead of styled?

Three things: too much product, oily hair before applying, or the wrong product type. Using heavy oil-based pomade on already-oily day-two hair compounds both sources of oil and results in a greasy appearance rather than a styled one. Always start with clean hair and use the minimum product needed to achieve the hold you need.

Related Reading From CADMEN Barber Academy

• The Slick Back for Men: Products, Technique, and How to Make It Last
• The Slick Back Haircut: How It Works and How to Style It
• The Slick Back Haircut for Men: What It Is and How to Style It
• Slick Back Haircut for Men: How to Wear It and Style It
• Slicked Back Hair for Men: The Cut, the Product, and the Style
• The Slicked-Back Hairstyle: How to Wear It and What to Use